LASER DIODE DRIVER CURRENT OUTPUT
- Compliance Voltage Range: 0.12 - 24.00 Volts
- Output Current Range: 0.00 - 15.00 Amps
- Current Noise & Ripple (rms): < 1% of Full Scale Current
- Current Setpoint Resolution: 4 mA
- Current Setpoint Accuracy: ± 0.5%
- Current Stability (4 hours): ≤ 100 ppm
- Current Limit Setpoint Accuracy: ± 2%
- Photodiode Current Measurement Accuracy: ± 0.5%
- Photodiode Current Measurement Range: 0.00 - 700 μA
INTEGRATED LASER DIODE PROTECTION FEATURES
- Soft-Start Current Ramp to Setpoint (User Programmable)
- Soft-Start Current Ramp Factory Default Set to 300 Milliseconds
- Current Limit
- Open Circuit Detection
- ESD and Power Surge Clamp
- Reverse Voltage Transient Clamp
- AC Line Filter
- Rear Panel Keylock Switch and Safety Interlock
- Short Circuit when Laser Diode Current Turned OFF
QCW PULSE MODE AND MODULATION
- Pulse Rise / Fall Time: < 25μs ( <5μs on request), 10%-90%
- Integrated QCW Pulse Function Generator or External Trigger
- MODULATION Input (BNC): Digital (TTL) or Analog
- MODULATION BNC Input Impedance: 10K ohm
- Integrated QCW Pulse Generator, Also Accepts External Trigger for QCW Pulses
- MODULATION Input Voltage Range: 0 ~ 4 Volts (4V = Max Current)
- Analog Modulation Bandwidth: 1 Hz – 20 kHz
AUXILIARY FUNCTIONS
- Temperature Sensor Input: 10kΩ NTC Thermistor
- Photodiode Cathode (Analog Connected to Gnd)
- Pilot Laser Anode, vs. Ground: (4 - 5V, 150 mA)
- Modulation Input
- Electronic Safety Interlock Connection
- RS232 Connections
- External Fan Control Circuit, 2 - 24V, 800mA (max)
USER INTERFACE AND CONNECTORS
- RS232 Standard
- LabView Drivers Included
- Laser Connector: DB-7W2, Female
- Support and Peltier Connector: SubD-15, Female
- Main Power Connector: MOLEX Housing 10013036; Terminal 8701031
DIMENSIONS AND POWER INPUT
- Power Input: Universal 90V ~ 230 VAC, 50/60 Hz
- Dimensions: 85 mm (H) x 105 mm (W) x 164 mm (L)
RECOMMENDED ACCESSORIES
- kab-39 Unterminated Connecting Cable -or- kab-231 Terminated Connecting Cable
High Power Laser Diode Driver; 15 Amp Current Source with Compliance Voltage up to 24 Volts
Key Features
- Up to 15 Amps, 24 Volts (CW)
- Designed for Multi-Chip and Series Connected Laser Diodes Requiring High Voltage
- CW and Quasi-CW Modes
- QCW Pulse Widths 25 μs to CW (<5 μs on request)
- RS232 Interface with LabVIEW Drivers; USB Control Available as an Option
- Previous Part Number: LDC-823
Shipping Information
– Shipping rates in the USA: $75
– Please contact us for International Shipping Rates
Order Placement
Orders for this product in North America and select International Regions are processed and fulfilled by LaserDiodeControl.com, part of the Laser Lab Source Marketplace Group. This product is manufactured by Ostech, GmbH. Mfg Part Number: ls11-la15v24-o8007-v0-823
Warranty Information
This product is sold with a full one year warranty. It is warrantied to be free from defects in material and/or workmanship for a period of one year from the date of shipment. The warranty is transacted and honored by Laser Lab Source for product purchases made through Laser Lab Source.
Weight |
3 lbs |
---|---|
Dimensions |
13 × 9 × 9 in |
Current Range |
5 Amps - 25 Amps |
Voltage Range |
10 Volts - 25 Volts |
Drive Current Mode |
CW + QCW Mode |
Form Factor |
Module (no front panel) |
Computer IO and Software |
GUI software included, RS-232 or 485, USB Available |
Driver Current |
15 A |
Driver Voltage |
24 V |
Product Overview
15 Amp High Voltage Driver Overview
The LDI-823 high power laser diode driver offers a maximum output of up to 330 Watts and can operate in constant current CW or pulsed Quasi-CW mode. These units feature a high efficiency design with high reliability components to offer long-life operation, and are integrated into industrial lasers systems used in harsh environments as well as laboratory R&D applications.
Laser Driver Safety Features
These drivers feature a user programmable soft-start ramp of the laser diode bias current. The factory sets the ramp time to 300 milliseconds as the default. This current ramp-up and ramp-down function is designed to protect the laser from thermal shock during power-up and power-down sequences. The LDI-823 has AC line filters and a fast response to shunt the current in the event of an open-circuit. Also included is the ability to control an external cooling fan: a temperature sensor input is available on the back panel, and the external fan control is capable of driving up to 800 mA at 24 V.
CW and Quasi-CW Modes of Operation
In addition to CW (continuous wave) mode of operation, the LDI-823 offers flexible modulation capabilities and an integrated QCW mode. The controller has an internal function generator which can be used to set the modulation signal or the quasi-CW pulses with a time base accuracy of 1.0%. In QCW mode, the user can also set the pulses from a remote TTL signal source. The typical rise time of the QCW mode for these drivers is 25 µs. Faster rise times are available on request. Rise times less than 5 µs are achievable if the load and cabling are optimized for fast pulses.
Laser Driver Control Interface
The LDC-823 features an RS232 interface and includes LabView drivers. An optional USB digital interface is available; inquire for details on ordering the USB control option.