Shop laser diodes, laser control products, AOM's & components from leading global brands.
CW + QCW Mode
Showing 33–44 of 44 results
-
SKU: LDI-597High Compliance Voltage Laser Diode Driver; Compliance Voltage Range 48 Volts; Current Range 15 Amps
- Enhanced Protection Features Designed Specifically for High Voltage, Multi-Emitter Laser Diodes and Series Connected Lasers
- Compliance Voltage Range up to 24 Volts, Current Range up to 14 Amps
- CW and QCW Modes of Operation // USB and RS232 Interface, LabVIEW Drivers
$2,295.00 -
SKU: LDI-127
High Power Laser Diode Driver | Current Range 14A, Voltage Range 24V | Multi-Stage Protection for High Power Laser Diodes
- Multiple Layers of Laser Diode Protection:
- User Adjustable Current & Voltage Limits
- User Adjustable Soft-Start Current Ramp
- Protection Against Power Black-Out / Brown-Out & AC Surges
- Laser Diode Over-Temperature Shut-Down / External Monitor & Shut-Down - CW and QCW Modes of Operation // USB and RS232 Interface, LabVIEW Drivers
$2,695.00 - Multiple Layers of Laser Diode Protection:
-
SKU: CCS-HP / Control and Mount Module
Pulsed Laser Diode Driver; 3.5 Amps; 1 Nanosecond to CW; Integrated Butterfly Mount (Type 1)
- User Set Pulse Widths from 1 Nanosecond to CW
- 0 to 3.5 Amps Output Current
- 1 Hz to 10 MHz Repetition Rate (250 MHz Available, refer to options)
$4,295.00 -
SKU: MultiDIODE-2
2-CHANNEL Laser Diode Driver | 1 x CW Driver and 1 x Pulsed + CW Driver | Optimized for Fiber Laser Seeds & Pumps
- Optimized for Fiber Laser Development / Pulsed Driver for Seed Laser and CW Driver for Pump
- USB Interface, Includes Programming Tools, Software Suite, DLL Library, and GUI
$3,995.00 -
SKU: TOMBAK / LASER-PULSE-PICKER
Digital Delay Generator | Laser Pulse-Picker | 200 MHz Bandwidth Delay Generator for Ultra-Fast Laser Timing & Synchronization
- Optimized for Laser Pulse-Picking, Timing & Control Systems
- USB Interface with Control Software
- Offered by AeroDIODE, a Laser Lab Source Marketplace Seller
$1,795.00In Stock -
SKU: CCM-STD / Control and Mount Module
ALL-INCLUSIVE / High Power Laser Diode Driver (13A / 23V Driver) with Integrated TEC Controller / Laser Mount / 2 x Peltier Coolers
- Current Source + TEC Controller + Integrated Laser Mount/Heat Sink
- Includes TEC Based Cooling for Laser Diodes up to 150 Watts of Laser Output Power
- Includes Mounting Plate and Heat Sink for Laser Diodes
$3,895.00 -
SKU: CCS-UHP / Control and Mount Module
Short-Pulse / High-Current Pulsed Laser Diode Driver; 9 Amps; 0.5 Nanoseconds to CW; Integrated Butterfly Mount
- User Set Pulse Widths from 0.5 Nanosecond to CW
- 0 to 9 Amps Pulsed Output Current
- 1 Hz to 10 MHz Repetition Rate
$5,195.00 -
SKU: CCS-HPP / Control and Mount Module
Pulsed Laser Diode Driver; 4 Amps / 24 Volts; Adjustable Pulses from 0.5 nsec to 8 µsec; 250 MHz, Integrated Butterfly Mount
- User Set Pulse Widths from 0.5 ns to 8 µs
- 4 Amp Current Range; 24V Voltage Range
- 1 Hz to 250 MHz Repetition Rate
$6,995.00 -
SKU: SHAPER-DIRECT / PULSED-DRIVER
Pulsed Laser Diode Driver; PULSE-SHAPER, User Designed Pulse Shapes
- User Designed Pulse Shapes; On-Board Arbitrary Waveform Generator (AWG) for User Customizable Pulse Shapes
- Pulse Width Range: 500 Picoseconds to 8 µsec
- 1.6 Amp Output Current, 20 MHz Repetition Rate
$5,995.00 -
SKU: SOA-STD / Control and Mount Module
Pulsed SOA Driver, 1.5 Amps; 1 Nanosecond to CW; Integrated TEC Controller & Butterfly Mount
- Pulses from 1 Nanosecond to CW
- Integrated Butterfly Packaged SOA Mount and TEC Controller
- 1.5 Amp Pulsed Current Range
$2,995.00 -
SKU: CCS-STD-T2 / Control and Mount Module
Pulsed Laser Diode Driver; 1.5 Amps; 1 Nanosecond to CW; Integrated Butterfly Mount (TYPE 2 Pin Configuration)
- TYPE-2 Butterfly Pin Configuration; User Set Pulse Widths from 1 Nanosecond to CW
- 0 to 1.5 Amps Output Current (3.5 Amps Available, refer to options)
- 1 Hz to 4 MHz Repetition Rate (250 MHz Available, refer to options)
$2,995.00In Stock -
SKU: CCS-STD / Control and Mount Module
Pulsed Laser Diode Driver, 1.5 Amps, 1 Nanosecond to CW, Integrated Butterfly Mount (TYPE 1)
- Pulse Width Range: 1 Nanosecond to CW
- Repetition Rate Range: 1 Hz to 4 MHz
- Pulsed Output Current Range: 0 to 1.5 Amps
$2,995.00In Stock
