


LASER DIODE SPECIFICATIONS
- Optical Output Power: 10 Watts
- Typical Mean Wavelength at 25ยฐC: 915 nm
- Spectral Width (FWHM): 3 nm
- Lumentum Laser Diode Model: L4-9891510-100C
FIBER SPECIFICATIONS
- Fiber Core Diameter: 105 ฮผm
- Numerical Aperture 0.15 NA
- Fiber Cladding: 125 ฮผm
- Fiber Buffer: 250 ฮผm
- Fiber Length: 1 meter
- Fiber Optic Connector: None (Bare Fiber)
CONTROLLER - INTEGRATED LASER DIODE PROTECTION FEATURES
- User Programmable Soft-Start Current Ramp to Setpoint
- Soft-Start Current Ramp Default Set to 300 Milliseconds
- Current Limit Temperature Limits (Upper and Lower)
- Temperature Limits (Upper and Lower)
- Open Circuit Detection
- Short Circuit when Laser Diode Current Turned OFF
- ESD and Power Surge Clamp
- Reverse Voltage Transient Clamp
- Factory Pre-Set Default Upper Temperature Limit: 35ยฐC
- AC Line Filter
- Rear Panel Keylock Switch and Interlock
CONTROLLER - MODULATION & QCW PULSE MODE
- Internal Pulse Generator QCW Pulse Width Rise Time: 20 ฮผsec to CW
- Pulse Time Base Accuracy: ยฑ 1.0%
- QCW Mode 1: User Adjustable Pulse Width and Repetition Rate using Internal Pulse Generator
- QCW Mode 2: External Trigger to Internal Pulse Generator: Rising Edge Triggered QCW Pulse with Internally Adjusted Pulse Width
- QCW Pulse with Internally Adjusted Pulse Width
- Modulation Input (BNC): Digital (TTL) or Analog
- Modulation BNC Input Impedance: 10K Ohm
- Modulation Input Voltage Range: 0 ~ 4 Volts (4V = Max Current)
- Analog Modulation Bandwidth: 1 Hz โ 20 kHz
PELTIER COOLED MOUNTING PLATE, HEAT SINK & CABLES
- Cooling Method: TEC/Peltier Coolers, Fan for Waste Heat Removal
- Heat Sink Dissipation Capacity @ 25ยฐC: 38 Watts
- Laser Mounting Plate Area: 58 mm x 52 mm
- System Includes 1 x 1.5 meter Current Interface Cable (50A rated)
- System Includes 1 x 1.5 meter TEC Control Interface Cable (20A rated)
USER INTERFACE
- Front Panel LCD, Full Alphanumeric Display with Key Pad
- RS232 Standard, LabView Drivers Included
- USB Optional; Inquire
- GUI Control Software Included
CONTROLLER - POWER REQUIREMENT, WEIGHT AND DIMENSIONS
- Power Input: Universal 98 ~ 230 VAC, 50/60 Hz
- Controller Weight (total): ~ 5 kg
- Controller Dimensions: 85 mm x 105 mm x 200 mm
ORDERING INFORMATION - PART NUMBERS
- LDX-940NM-10W (940nm Center Wavelength)
- LDX-915NM-10W (915nm Center Wavelength)
- LDX-975NM-10W (975nm Center Wavelength)
ALL-INCLUSIVE: 915nm Laser Diode, 10W Fiber-Coupled Laser installed in Control & Mount System
Key Features
- User Adjustable Laser Output Power up to 10 Watts
- Includes Lumentum L4 Packaged 10 Watt Laser Diode
- RS232 and USB with LabView Drivers
- Also Available at 940nm and 975nm, Please Inquire
Shipping Information
– Shipping rates in the USA: $75
– Please contact us for International Shipping Rates
Order Placement
Orders for this product in North America and select International Regions are processed and fulfilled by LaserDiodeControl.com, part of the Laser Lab Source Marketplace Group. This product is manufactured by Ostech, GmbH. Mfg Part Number: ds11-la14v14-pa08v14-t8535-v1-002; hsa-38-0610-v0-649
Warranty Information
This product is sold with a full one year warranty. It is warrantied to be free from defects in material and/or workmanship for a period of one year from the date of shipment. The warranty is transacted and honored by Laser Lab Source for product purchases made through Laser Lab Source.
Weight |
3 lbs |
---|---|
Dimensions |
13 × 9 × 9 in |
Top Level LASER DIODE Power Ranges |
5 W - 50 W |
Top Level LASER DIODE Sub-Ranges |
900nm - 1200nm |
900nm to 980nm Most Popular Wavelengths |
915 nm |
Laser Wavelength |
915 nm |
Laser Output Power |
10 W |
Fiber Core Diameter |
105 ยตm |
Fiber-Coupled Output |
Fiber-Coupled Packages |
Form Factor |
Benchtop (front panel) |
Integrated Control and Mount Units |
High Power (>5A) Units |
Spectral Line Width (nm) |
3 |
Mode Structure |
Multi-Mode |
Laser Diode Package Type |
TURN-KEY Systems (Laser+Driver) |
900nm to 980nm Range Turn-Key Systems |
All-Inclusive Systems |
915nm Turn-Key Systems |
915nm Systems |
Product Overview
915nm Laser Diode Source System Overview
The LDX-915NM-10W features a Lumentum 2-pin multimode pump laser diode source integrated in a precision control system. It is a pre-configured system which includes the fiber coupled L4 packaged laser, the controller, the mounting plate/heat sink and the interconnect cables. This fully configured system is optimized for driving and controlling high power single-emitter pump lasers. The mounting hole footprint pattern is pre-configured for the Lumentum L4 and L4i package style module. These systems are also available at 940nm and 975nm center wavelengths.
-
Simple to Operate:
System ships with 915nm laser diode installed and tested in CW control electronics and mounting module.
-
Flexible:
User can remove and replace the laser diode in the future as needed.
User has Complete Control of the 915nm Laser Diode
The user has complete control of the 10W laser diode through the front panel or through the rear panel RS232/USB. The user controls the bias current, temperature set-point, CW or modulated mode and all other key parameters. The front panel has an LCD display with a touch key-pad. The menu structure is simple to operate, and features a status menu with current and actual temperature for the default home page setting. These systems come with an RS-232 interface and can be ordered with an optional USB interface. LabView drivers are available free of charge charge.
Fully Configured Temperature Stabilized Mount and Heat Sink
These units have an high power TEC temperature controller with a full P.I.D. control loop to provide fast and temperature control of the source laser module. The laser diode is mounted on a TEC cooled, nickel-plated copper mounting plate. The mounting plate offers very high surface finish and flatness for low thermal impedance. The cooled mounting plate for the laser is attached to a fan-cooled air duct to remove the waste heat and keep the laser temperature stable.