Benchtop High Power Laser Diode Driver; 20A / 30V Driver | 216W TEC Controller | Multi-Stage Protection Designed Specifically for High Power Laser Diodes
kab-286 Unterminated Power Cable -or- kab-297 Terminated Power Cable
acc-417 USB-RS232 Converter
Benchtop High Power Laser Diode Driver; 20A / 30V Driver | 216W TEC Controller | Multi-Stage Protection Designed Specifically for High Power Laser Diodes
Multiple Layers of Laser Diode Protection: - User Adjustable Current & Voltage Limits - User Adjustable Soft-Start Current Ramp - Protection Against Power Black-Out / Brown-Out & AC Surges - Laser Diode Over-Temperature Shut-Down / External Monitor & Shut-Down
Operates in CW and Quasi-CW Mode
QCW Pulses 25ฮผs to CW
User-Adjusted Soft Start Current Ramp to Setpoint
LCD Front Panel Display, Intuitive Menu and Key Pad
USB / RS232 Interface with LabVIEW Drivers
Shipping Information
– Shipping rates in the USA: $75
– Please contact us for International Shipping Rates
Order Placement
Orders for this product in North America and select International Regions are processed and fulfilled by LaserDiodeControl.com, part of the Laser Lab Source Marketplace Group. This product is manufactured by Ostech, GmbH. Mfg Part Number: ds11-la20v30-pa12v18-t12786-v2-467
Warranty Information
This product is sold with a full one year warranty. It is warrantied to be free from defects in material and/or workmanship for a period of one year from the date of shipment. The warranty is transacted and honored by Laser Lab Source for product purchases made through Laser Lab Source.
LDC-467 | 30 Volt / 20 Amp High Compliance Voltage Laser Diode Driver with 216 Watt TEC Controller
These high power laser diode driver & TEC controller instruments offer high compliance voltage to to safely drive multi-emitter laser diode modules and devices connected in series.
LDC-467 Laser Diode Driver
The LDC-467 has been designed to electrically bias high power laser diodes while protecting them from the common causes of damage which can harm or destroy the laser. Because high power lasers require relatively high levels of DC current and voltage, and generate high levels of waste heat, they have a unique set of electrical and thermal requirements which need to be addressed to protect them from being damaged. Additionally, the driver has been designed with features to assist the user to safely operate the laser diode under test. It offers features such as a front panel e-Stop power kill switch, redundant safety interlocks, and a front panel key-switch master power on/off.
Designed to Protect High Power Laser Diodes from Being Damaged
User Adjustable Temperature, Current and Voltage Limits
Setting temperature, current and voltage limits are necessary to ensure a long lifetime for the laser diode. Limits can be set using the front panel & key-pad, or through software and/ or Labview GUI.
User Adjustable Soft-Start Current Ramp
There is an internal 300 millisecond soft-start ramp to the current set-point. This reduces the potential for thermal shock to the laser at power ON and is used to ensure good electrical contact prior to fully applying the current bias the laser diode. The user has the ability to adjust the ramp time in order to optimize performance. These laser diode drivers offer the industries’ only user-set slow start current ramp to the bias set point. This allows the user to extend the ramp time out to 10โs of seconds to prevent the possibility of thermal shock and prevent over driving the module during the start up sequence.
Protection Against Power Black-Out / Brown-Out and AC Power Surges
AC line filters and power clamp circuitry protects the laser diode from AC input power
transients and surges. These transients can occur when the bench / wall power source is
momentarily interrupted due to a black or brown-out power outage.
Laser Diode Over-Temperature Shut-Down / External Monitor & Shut-Down
A thermistor input is provided to allow the user to monitor the temperature of the laser diode. This can then be used to shut the laser diode off if a temperature maximum for the laser diode is exceeded. Also included is the ability to control an external cooling fan. A temperature sensor input is available on the back panel, and the external fan control supply is capable of driving up to 500 mA at 24 V.
User Safety Features
The driver has been designed with features to assist the user to safely operate the laser diode under test. These features include a front panel e-Stop power kill switch, redundant safety interlocks, a front panel key-switch master power on/off, and an over-temperature thermistor sensor input.
CW and Quasi-CW Modes of Operation
In addition to CW (continuous wave) mode of operation, these laser diode drivers offer flexible modulation capabilities and an integrated QCW mode (integrated pulse generator). The user can apply a TTL digital or analog modulation input through the rear panel BNC. The controller has an internal function generator which can be used to set the modulation signal or the quasi-CW pulses with a time base accuracy of 1.0%. In QCW mode, the user can set pulse parameters from a remote TTL signal source or use the internal function generator.
User Interface / Front Panel + Keypad / RS232 / USB / LabVIEW Drivers
Controller setup is fast and intuitive via the front panel LCD display and keypad with a simple to use menu structure. These drivers come with standard an RS-232 interface and a USB interface adapter. The included LabView driver GUI makes set-up and control of the system fast and simple.
