Shop laser diodes, laser control products, AOM's & components from leading global brands.
25 Volts - 150 Volts
Showing all 15 results
-
SKU: CCM-UHP / Control and Mount ModuleALL-INCLUSIVE / Ultra-High Power Laser Diode Driver (21A / 36V Driver) with Integrated TEC Controller / Laser Mount / 2 x High Power Peltier Coolers
- 21 Amp Current Range; 36 Volt Compliance Voltage Range (For Laser Diodes up to 180W)
- Integrated High Power TEC Controller
- Includes Laser Diode Mounting Plate and Heat Sink
$4,995.00 -
SKU: LDD-1301 / LASER-DIODE-DRIVER
High Power Precision LASER DIODE DRIVER; 20 Amp Current Range / 45V Compliance Voltage Range
- Up to 20 Amp CW Output
- Up to 45 Volt Compliance Voltage
- Optional Laser Power Control Mode Available
$627.00 -
SKU: LDD-1303 / LASER-DIODE-DRIVER
High Voltage Precision LASER DIODE DRIVER; 20A Current Range / 120V Compliance Voltage Range
- 120 Volts Compliance Voltage for High Power Pumps and Series Connected Laser Diodes
- User Interface: RS232, RS485, USB 2.0, CAN, Analog Input || Includes GUI Virtual Front Panel Software
- Includes Aluminum Base Plate for Cooling and Simple Attachment to Heat Sink
$1,076.00In Stock -
SKU: LDD-1137-PO / LASER-DIODE-DRIVER
High Power PULSED Laser Diode Driver, Current Setpoint Range 2A to 75A
- Pulse Mode Rise Time 1 µs to CW -- Pulse Width / Rep Rate / Duty Cycle are Set by Utilizing TTL Input
- Compact, Highly Advanced Design w/RS485 / USB / Ethernet Interfaces and Control Software Included
- Arbitrary Waveform Look-Up Table Stored On-Board
$1,964.00 -
SKU: LDD-1137-CW / LASER-DIODE-DRIVER
High Power Precision LASER DIODE DRIVER; 75 Amp Current Range / 70V Compliance Voltage Range
- High Performance, Low Noise Laser Diode Current Source
- Compact, Highly Advanced Design with RS485 / USB / Ethernet Interfaces and Control Software Included
- Current Noise < 0.2% of Set-Point
$1,710.00 -
SKU: SF6100
High Power Laser Diode Driver / 25A Current Range / 40V Compliance Voltage Range
- Designed for High Compliance Voltage Pump Laser Diodes and Series Connected Lasers
- Analog Control Signal Connector, RS-232 / UART Connector and Manual Trim Potentiometer Controls
- Soft-Start Current Ramp Protection, Current Limit, Reverse Voltage Clamp
$577.50In Stock -
SKU: SF6060
15 Amp Laser Diode Driver / 40 Volts Compliance Voltage Range
- High Power Driver Designed for Pump Laser Diodes (ie 808nm, 915nm, 940nm, 976nm)
- Enhanced Laser Diode Protection Includes Soft-Start Current Ramp / Current Limit / Reverse Voltage Clamp / Thermistor Input to Protect Laser from Over-Heating
- User Control Methods: RS232 w/ Control Software Virtual Front Panel GUI / On-Board Trim Potentiometers / Analog Controls Signal Connector / RS232 to USB Adapter (Optional)
$544.50In Stock -
SKU: MBH1240
12 Amp Laser Diode Driver / 40 Volts Compliance Voltage Range
- Touch-Screen Front Panel / Adjustment Knobs and Button Front Panel Controls / Remote Control via USB; GUI Software and SCPI Communication Protocol
- Multiple Layers of Laser Diode Protection
- Laser Over-Temperature Protection Circuit
$2,513.50In Stock -
SKU: SF6040
10 Amp Laser Diode Driver / 40 Volts Compliance Voltage Range
- High Compliance Voltage Range for Multi-Emitters and Laser Diodes Connected in Series
- Soft-Start Current Ramp, Current Limit, Reverse Voltage Protection
- Analog Control Signal/ RS-232 / UART (USB Optional, $35)
$522.50 -
SKU: LDC-467
Benchtop High Power Laser Diode Driver; 20A / 30V Driver | 216W TEC Controller | Multi-Stage Protection Designed Specifically for High Power Laser Diodes
- Multiple Layers of Laser Diode Protection:
- User Adjustable Current & Voltage Limits
- User Adjustable Soft-Start Current Ramp
- Protection Against Power Black-Out / Brown-Out & AC Surges
- Laser Diode Over-Temperature Shut-Down / External Monitor & Shut-Down - Operates in CW and Quasi-CW Mode
- QCW Pulses 25μs to CW
$3,695.00 - Multiple Layers of Laser Diode Protection:
-
SKU: LDI-880
High Power Laser Diode Driver | Current Range 100 Amps | Compliance Voltage Range 30 Volts
- Current up to 100 Amps; Compliance Voltage up to 30 Volts
- Optimized for Safely Biasing Laser Diode Bars and Stacks in Series
- CW Mode Pulse Mode; User-Set Pulse Widths from 30 µs to CW
$6,295.00 -
SKU: LDI-824
High Power Laser Diode Driver / 25A Current Range / 64V Compliance Voltage Range
- Laser Diode Protection Features Optimized for High Voltage Pump Laser Diodes and Laser Diodes Connected in Series
- Operates in CW Mode or QCW Mode: Integrated Quasi-CW Pulse Generator with Pulse Width from 30 µs to CW
- RS232 Interface / USB Option Included / LabVIEW Drivers
$4,295.00In Stock -
SKU: LDI-726
High Power Laser Diode Driver | Current Range 20A, Voltage Range 30V | Multi-Stage Protection Designed Specifically for High Power Laser Diodes
- Multiple Layers of Laser Diode Protection:
- User Adjustable Current & Voltage Limits
- User Adjustable Soft-Start Current Ramp
- Protection Against Power Black-Out / Brown-Out & AC Surges
- Laser Diode Over-Temperature Shut-Down / External Monitor & Shut-Down - CW and QCW Pulsed Modes of Operation
- RS232 & USB Interface with LabVIEW Drivers
$3,895.00 - Multiple Layers of Laser Diode Protection:
-
SKU: LDI-597
High Compliance Voltage Laser Diode Driver; Compliance Voltage Range 48 Volts; Current Range 15 Amps
- Enhanced Protection Features Designed Specifically for High Voltage, Multi-Emitter Laser Diodes and Series Connected Lasers
- Compliance Voltage Range up to 24 Volts, Current Range up to 14 Amps
- CW and QCW Modes of Operation // USB and RS232 Interface, LabVIEW Drivers
$2,295.00 -
SKU: CCM-HP / Control and Mount Module
ALL-INCLUSIVE / High Power Laser Diode Driver (21A / 36V Driver) with Integrated TEC Controller / Laser Mount / 2 x Peltier Coolers
- 21 Amp Current Range; 36 Volt Compliance Voltage Range
- Integrated High Power TEC Controller
- Includes Laser Diode Mounting Plate and Heat Sink
$4,495.00
