


ELECTRICAL-OPTICAL CHARACTERISTICS (TYPCIAL @ T = 25 °C)
- Wavelength: 825 nm
- Spectral Width: 4 nm
- Pulse Optical Power: 100 mW
- CW Optical Power: 50 mW
- Slope Efficiency: 0.40 mW/mA
ELECTRICAL SPECIFICATIONS
- Threshold Current: 60 mA
- Operating Current (CW): 200 mA
- Operating Voltage: 2.4 V
- Monitoring Output Current (PD): 0.4 mA
OPTICAL FIBER SPECIFICATIONS
- FC/APC Connector
- Furcation Tubing ⌀0.9 mm
- Other Fiber and Connector Types Available; Inquire
830nm, 50 mW CW / 100 mW Pulsed Fabry-Perot Fiber-Coupled Laser Diode
Key Features
- Wavelength 830 nm
- 50 mW CW / 100 mW Pulse Output Power
- FC/APC Connector; Single Mode Fiber
Shipping Information
Shipping rates in the USA:
– All products: $25
– Please contact us for International Shipping Rates
Warranty Information
This product is sold with a full one year warranty. It is warrantied to be free from defects in material and/or workmanship for a period of one year from the date of shipment.
Weight |
1 lbs |
---|---|
Dimensions |
10 × 8 × 6 in |
Top Level LASER DIODE Power Ranges |
1 mW - 500 mW |
Top Level LASER DIODE Sub-Ranges |
600nm - 900nm |
Laser Wavelength |
830 nm |
Laser Output Power |
0.05 W |
Fiber-Coupled Output |
Fiber-Coupled Packages |
Spectral Line Width (nm) |
4 |
Mode Structure |
Single-Mode |
Laser Diode Package Type |
Coaxial Fiber-Coupled |
Product Overview
830nm, 50 mW CW / 100 mW Pulsed Fabry-Perot Fiber-Coupled Laser Diode
LD4B-830-FP-50-COAXB-3-SM05-FA-CW-1.0 is an AlGaAs quantum well laser diode with internal photodiode, coupled to an optical fiber and packaged into a hermetic TO-case. This compact coaxial laser is mounted in a double-sided bracket to facilitate mounting and heat-sinking.
-
- • Wavelength: 830 nm
-
- • Cavity type: Fabry-Perot
-
- • Optical power: up to 50 mW in CW mode and up to 100 mW in pulse mode
-
- • Package types: coaxial
-
- • Built-in monitor photodiode
Important Notes on Operating Laser Diodes:
Electrical Operation: Operating a laser diode above the maximum ratings shown on the data sheet even for very short periods of time can damage the laser diode or reduce its lifetime. They should be electrically biased with a “laser diode driver” class current supply with low electrical noise and protection against voltage and current surges. Laser diodes are very sensitive to electrostatic discharge (ESD). Proper ESD precautions must be taken.
Mounting and Temperature Control: In order to maintain the lifetime of a laser diode, proper heat management is essential. Due to the design of the laser diode, heat is typically dissipated only through the base plate of the diode‘s package. A proper heat conducting interconnection between the diodes base plate and the heat sink must be maintained. Some devices require the use of a thermo-electric temperature controller (TEC controller) to remove the heat from the laser and stabilize the temperature.