USB Available
Showing 1–16 of 99 results
-
SKU: CCS-CW-HP2-T2 / DRIVER-MODULE
Hybrid 1.8 Amp Laser Diode Driver & Butterfly Mount Module (Type-2 Pin Config.)
- Integrated 1,800 mA Current Source + TEC Controller + Butterfly Mount
- Preconfigured for Type-2 Butterfly Laser Pinout
- Low Noise < 0.03 % Current Range Full Scale
$2,745.00 -
SKU: CCM-MINI / Control and Mount Module
ALL-INCLUSIVE / Mini Laser Diode Driver (13A / 23V Driver) with Integrated TEC Controller / Laser Mount / 1 x Peltier Cooler
- Current Source + TEC Controller + Integrated Laser Mount/Heat Sink
- Includes TEC Based Cooling for Laser Diodes up to 20 Watts of Laser Output Power
- Includes Mounting Plate and Heat Sink for Laser Diodes
$3,295.00 -
SKU: SF8300-NM
3 Amp LASER DIODE DRIVER / 16W TEC Controller Module
- Hybrid Control & Mount Module:- 3000 mA Laser Diode Driver- 16W TEC Controller
- 4-LEVEL Advanced Laser Diode Protection:- Crowbar power surge & transient shunt- Soft-start current ramp- Current limit- Dual stage temperature limits
- User Interface Options:- On-board trimpots- Analog signal controls- RS232- USB (optional) w/ GUI interface software
$473.00 -
SKU: LDI-127/
High Power Laser Diode Driver | Current Range 15A, Voltage Range 56V | Multi-Stage Protection for High Power Laser Diodes
- Multiple Layers of Laser Diode Protection:
- User Adjustable Current & Voltage Limits
- User Adjustable Soft-Start Current Ramp
- Protection Against Power Black-Out / Brown-Out & AC Surges
- Laser Diode Over-Temperature Shut-Down / External Monitor & Shut-Down - CW and QCW Modes of Operation / USB and RS232 Interface, LabVIEW Drivers
$2,695.00 - Multiple Layers of Laser Diode Protection:
-
SKU: TC1540 v1.5 / TEC-CONTROLLER
High Power TEC Controller, 600W Output, Temperature Control Stability 0.01°C
- High Power 600 Watts Supports Peltier Elements Connected in Series
- Includes GUI Virtual Control Panel for Simple / Fast Set-Up by USB
- User Interface by USB, RS232, or Analog Signals Control
$545.00 -
SKU: SF8075-DIL-ZIF14
DIL Package / ALL-IN-ONE / 750 mA Hybrid Laser Diode Driver, TEC Controller & DIL Mount Module (TYPE-1)
- Hybrid Control & Mount Module:- 750mA Laser Diode Driver- 16W TEC Controller (full PID)- 14-Pin DIL Mount
- 4-LEVEL Advanced Laser Diode Protection:- Crowbar power surge & transient shunt- Soft-start current ramp- Current limit- Dual stage temperature limits
- User Interface Options:- On-board trimpots- Analog signal controls- RS232- USB (optional) w/ GUI interface software
$853.50In Stock -
SKU: SF8075-TO56B
ALL-IN-ONE / 750 mA Hybrid Laser Diode Driver and Coaxial / TO-Can Mount Module
- User Interface:- On-board trimpots- Analog signal control connector- Digital connector RS232- Digital connector USB w/ Virtual Front Panel Software
- Heat Sink Mounting Plate and Screw-Down Holes for Bracketed / Coaxial Packaged Laser Diodes
- Advanced Laser Diode Protection:- Power surge clamp & transient shunt circuit- Soft-start current ramp- Current limit
$795.00In Stock -
SKU: SF8150-14
1.5 Amp Hybrid LASER DIODE DRIVER / TEC Controller / Butterfly Mount Module / Solder Model / (TYPE-1 Butterfly)
- Hybrid Control & Mount Module:- 1.5 Amp Laser Diode Driver- 16W TEC Controller (full PID)
- 4-LEVEL Advanced Laser Diode Protection:- Crowbar power surge & transient shunt- Soft-start current ramp- Current limit- Dual stage temperature limits
- User Interface Options:- On-board trimpots- Analog signal controls- RS232- USB (optional) w/ GUI interface software
$577.50In Stock -
SKU: ID-OSA-MPD-01
High Resolution Optical Spectrum Analyzer (OSA); 2.5 Picometer Resolution; Scanning Range 1528.5nm – 1567.5nm
- 2.5 Picometer Spectral Sampling Resolution
- 1528.5 nm - 1567.5 nm Wavelength Scan Range
- 2 Hertz Scan Rate
$9,890.00 -
SKU: SOM-STD | FIBER-OPTIC-MODULATOR
Advanced Performance Turn-Key Fiber Optic Modulator; High Speed Intensity Modulator & Optical Switch
- An SOM (semiconductor optical modulator) utilizes an integrated SOA (semiconductor optical amplifier) operating in a fast-pulse mode as a light modulator; this new approach results in a higher performance fiber optic modulator.
- HOW IT WORKS: A CW laser source (customer supplied) is used as the input to the SOM unit. An SOA is integrated in the SOM-STD unit along with the pulsing control electronics. The current driving the internal SOA is operated in a high repetition rate pulsed mode. The result is a fiber optic modulator which offers multiple advantages over traditional modulator technologies such as an AOM or an EOM.
- Available at wavelengths from 750 nm to 1700 nm
$8,790.00 -
SKU: RLS/LDX-785NM-500MW
Turn-Key 785nm Laser Diode Source and Control System, 500 mW Output Power
- Spectral Linewidth: < 0.1 nm
- Wavelength Stability: ±0.005nm over 4 Hours (Volume Bragg Grating Stabilized Laser Diode)
- Power Stability: ±1.0% (8 Hours)
$3,200.00 -
SKU: LDD-1301 / LASER-DIODE-DRIVER
High Power Precision LASER DIODE DRIVER; 20 Amp Current Range / 45V Compliance Voltage Range
- Up to 20 Amp CW Output
- Up to 45 Volt Compliance Voltage
- Optional Laser Power Control Mode Available
$627.00 -
SKU: LDD-1303 / LASER-DIODE-DRIVER
High Voltage Precision LASER DIODE DRIVER; 20A Current Range / 120V Compliance Voltage Range
- 120 Volts Compliance Voltage for High Power Pumps and Series Connected Laser Diodes
- User Interface: RS232, RS485, USB 2.0, CAN, Analog Input || Includes GUI Virtual Front Panel Software
- Includes Aluminum Base Plate for Cooling and Simple Attachment to Heat Sink
$1,076.00In Stock -
SKU: LDD-1137-CW / LASER-DIODE-DRIVER
High Power Precision LASER DIODE DRIVER; 75 Amp Current Range / 70V Compliance Voltage Range
- High Performance, Low Noise Laser Diode Current Source
- Compact, Highly Advanced Design with RS485 / USB / Ethernet Interfaces and Control Software Included
- Current Noise < 0.2% of Set-Point
$1,710.00 -
SKU: TEC-1161-4A-NTC / TEC-CONTROLLER
Dual Output Precision TEC Controller, 2 x 84W Output Channels, 0.01 °C Temperature Control Stability
- Two Independent TEC Controller / Driver Channels
- 2 x 84 Watt TEC Controllers
- Output Current up to ±4 Amps per Channel
$656.00 -
SKU: TEC-1090-HV-NTC / TEC-CONTROLLER
High Power Precision TEC Controller, 480W Output, 0.01°C Temperature Control Stability, Ultra-Compact
- Controls Temperature to within 0.01°C of Set-Point
- Output Current Range ±16 A
- Output Voltage Range ±30 V
$640.00