OPTICAL AND ELECTRICAL SPECIFICATIONS

• Wavelength: 1063.5 nm (±1 nm)
• Pulsed Output Power: 850 mW (max)
• CW Output Power: 200 mW
• Spectral Width: ~ 1 MHz (pulsed mode)
• Spectral Width: 200 kHz (CW mode)
• Threshold Current: 40 mA
• Operating Current: 350 mA (CW)
• Operating Voltage: 2.0 V
• Wavelength Shift w/Temperature: 0.06 nm/°C
• Wavelength Shift w/Current: 0.0025 nm/mA
• ---- SHORT-PULSE MODE (1 - 20 Nanoseconds)
• Short-Pulse Mode: 1 - 20 nanoseconds
• Short-Pulse Mode Current: 1,600 mA (max)
• Short-Pulse Mode Peak Output Power: 800 mW (typ)
• Short-Pulse Mode Duty Cycle Limit: 1% (repetition rate max 10 MHz; max rep rate is determined by the pulse width and duty cycle)
• ---- STANDARD PULSE MODE (20 - 200 nanoseconds)
• Standard Pulse Mode Range: 20 nsec to 200 nsec
• Standard Pulse Mode Current: 800 mA (max)
• Standard Pulse Mode Duty Cycle Limit: 5 % (repetition rate max 10 MHz; max rep rate is determined by the pulse width and duty cycle)
• ---- PICOSECOND PULSE MODE (100 picoseconds to 1 nanosecond)
• Picosecond Pulse Mode Range: 0.1 nsec to 1 nsec
• Picosecond Pulse Mode Current: 1,600 mA (max)
• Picosecond Pulse Mode Duty Cycle Limit: 1% (repetition rate max 50 MHz; max rep rate is determined by the pulse width and duty cycle)
• ** ~100 picosecond pulses are achievable in a gain switching mode with dedicated pulse driver

FIBER AND PACKAGE SPECIFICATIONS

• Fiber Type: Nufern PM980-HP or Fujikura SM98
• No internal Isolator (|isolator available as an option / request details)
• Mode Field Diameter: 6.6 µm
• Buffer Diameter: 250 µm
• Fiber Length: 1 m
• Package Type: 10-Pin Butterfly
• Fiber Termination: Ceramic Ferrule
• FC/APC Connector Available (Option FC/APC-165)

ABSOLUTE MAXIMUM RATINGS

• Storage Temperature: -40ºC to 58ºC
• CW Laser Forward Current: 1.5 A
• Laser Reverse Voltage: 2 V
• Heat Pump Current: 2.2 A
• Heat Pump Voltage: 3.5 V
• Lead Soldering Temperature: 350ºC
• Fiber Bend Radius: 20mm (min)