OsTech
Showing 1–16 of 26 results
-
SKU: LDM-95W
95W High Power Laser Diode Heat Sink and Mount; Fan & Peltier Cooled
- Laser Diode Mounting Plate Footprint and Lead Wires Pre-Configured for your Laser Diode Package; Integrated TE / Peltier Cooler Under Mounting Plate and 10 kOhm Thermistor
- Top Mounting Plates and Configurations Available for nLight, Jenoptik, LUMICS, QPC Lasers, Lumentum, DILAS-COHERENT, BWT and Others
- Comes with High Current Leads which Match your Laser Diode Anode/Cathode Pin Diameter and Control Signals I/O Cable for Laser Package
$1,149.00 -
SKU: LDM-50W
50W High Power Laser Diode Heat Sink and Mount; Fan & Peltier Cooled
- Integrated TE / Peltier Cooler Under Mounting Plate and 10 kΩ Thermistor
- Mounting Plate can be Pre-Configured for your Laser Diode Package
- Mounting Plate Thermal Resistance R (th): < 0.06 K/W
$879.00 -
SKU: LDM-275W
275W High Power Laser Diode Heat Sink and Mount; Water Cooled Base Plate
- Pre-Configured Mounting Plate for your Laser Package Type Available
- Thermal Resistance R (th): 0.01 K/W
- Laser Diode Waste Heat Removal of 275 Watts at Ambient / Lab Temperature of 25°C
$965.00 -
SKU: LDM-BUTTERFLY-X
14-Pin Butterfly Packaged Laser Diode Mount; Pre-Wired for Your Specific Laser Diode Pin Configuration
- No Jumper Wires to Set; Simply Choose the Correct Model & it Ships Pre-Configured for Your Laser Diode
- Optional Graphite Thermal Mounting Pad for Maximum Temperature Stability
- Option for Additional Peltier Cooler to Control the Butterfly External Case Temperature
$645.00 -
SKU: LDM-250W
250W High Power Laser Diode Heat Sink and Mount; Fan Cooled
- Pre-Configured Mounting Plate for your Laser Package Type Available
- Thermal Resistance R (th): 0.059 K/W
- Laser Diode Waste Heat Removal of 250 Watts at Ambient / Lab Temperature of 20°C
$985.00 -
SKU: TEC-336W
High Power TEC Controller; 336W Output, 0.01°C Temperature Control Stability
- Works with all Thermistors: (ie 10 kΩ) and RTD Sensors (ie pt 100)
- Temperature Control Stability 0.05°C
- ± 48 Volt Range for Series Connected Peltier Elements and High Power Peltier Elements
$2,795.00In Stock -
SKU: TEC-305
High Power TEC Controller, 216W Output, 0.005 °C Temperature Control Stability
- Up to ± 12 Amps, ± 20 Volts Output to Peltier Cooler
- Control Stability (8 hours @ 25°C) : 0.005°C
- User Set Laser Diode Temperature Limits (High and Low)
$1,049.00 -
SKU: TEC-020
High Power TEC Controller, 180W Output, 0.005°C Temperature Control Stability
- Accurate, fast temperature stabilization of high power laser diodes and thermal loads
- Works with all thermistors (ie 10 kΩ), 4-wire RTD sensors (ie pt 100), K-type thermocouples
- Temperature control stability 0.005°C (1 hr. @ 25.00°C)
$2,295.00In Stock -
SKU: TEC-590
Dual Output TEC Controller, 2 x 128W Outputs, 0.05°C Temperature Control Stability
- High Stability Dual Independent Temperature Controller for Laser Diodes and Crystals
- Dual ±8 A, ±16 V, TEC / Peltier Controller Outputs
- Dual Temperature Sensor Inputs
$1,049.00 -
SKU: RLS/MCX/6500-LDX
Five Channel Fiber-Coupled Laser Diode System; 808nm, up to 50W Laser Output Power per Channel
- User Specified Per-Channel Output Power (up to 50W per channel)
- Independently Adjustable Output Power on All Channels
- Peltier (TEC) Cooled Mounting Plates for Each Channel
-
SKU: LDX-1064NM-60W
1064nm, 60W, Turn-Key Laser Diode Source & Control System; Fiber-Coupled Rear Panel Output
- User-Adjustable Output Power 0 - 60 Watts
- TEC-Cooled Internal Laser Mount, Air-Cooled Chassis
- CW Mode, or QCW Pulse Range: < 25 μs - CW
$9,475.00 -
SKU: LDX-1064NM-30W
1064nm, 30W Output, 400µm Multimode Fiber-Coupled Laser Diode in Turn-Key Control System
- User-Adjustable Output Power 0 - 30 Watts
- TEC-Cooled Internal Laser Mount, Air-Cooled Chassis
- CW Mode, or QCW Pulse RanGe: < 25 μs - CW
$8,945.00 -
SKU: LDX-1064NM-120W
1064nm, 120W Output, 400µm Multimode Fiber-Coupled Laser Diode in Turn-Key Control System
- User-Adjustable Output Power 0 - 120 Watts
- TEC-Cooled Internal Laser Mount, Air-Cooled Chassis
- CW Mode, or QCW Pulse Range: < 25 μs - CW
$12,655.00 -
SKU: LDX-976NM-55W
976nm, 55W Output, 105µm Multimode Fiber-Coupled Laser Diode in Turn-Key Control System
- User Adjustable Output Power 0 to 55 Watts (CW)
- 105 µm Core Fiber; 95% of Power within 0.15 NA
- TEC-Cooled Internal Laser Mount, Air-Cooled Chassis
$8,495.00 -
SKU: LDX-976NM-45W
976nm, 45W Output, 400µm Fiber-Coupled Laser Diode in Pre-Configured Control & Mount System
- User Adjustable Laser Output Power 0 to 45 Watts
- Peltier Cooled Laser Diode Mount Fully Configured for Laser Diode
- Factory Pre-Set Current & Temp. Limits Keep Laser in Safe Operation Range
$7,495.00 -
SKU: LDX-808NM-40W
808nm, 40W Output, 200µm Fiber-Coupled Laser Diode in Pre-Configured Control & Mount System
- User Adjustable Laser Output Power 0 to 40 Watts; User Has Control of Temperature and all Laser Operating Parameters
- Peltier Cooled Laser Diode Mount Fully Configured for Laser Diode
- RS232 Interface with LabVIEW Drivers; USB Optional
$5,895.00In Stock