meerstetter
Showing 1–16 of 18 results
-
SKU: DPY-1115
TEC Controller Display Kit | Accessory for Meerstetter Engineering Precision TEC Controllers
- OLED Display Kit for Meerstetter TEC Controllers
- Simplifies OEM Integration
- Connects Directly to TEC Board
$190.00In Stock -
SKU: LDD-1301 / LASER-DIODE-DRIVER
High Power Precision LASER DIODE DRIVER; 20 Amp Current Range / 45V Compliance Voltage Range
- Up to 20 Amp CW Output
- Up to 45 Volt Compliance Voltage
- Optional Laser Power Control Mode Available
$591.00In Stock -
SKU: LDD-1303 / LASER-DIODE-DRIVER
High Voltage Precision LASER DIODE DRIVER; 20A Current Range / 120V Compliance Voltage Range
- 120 Volts Compliance Voltage for High Power Pumps and Series Connected Laser Diodes
- User Interface: RS232, RS485, USB 2.0, CAN, Analog Input || Includes GUI Virtual Front Panel Software
- Includes Aluminum Base Plate for Cooling and Simple Attachment to Heat Sink
$1,016.00In Stock -
SKU: LDD-1137-PO / LASER-DIODE-DRIVER
High Power PULSED Laser Diode Driver, Current Setpoint Range 2A to 75A
- Pulse Mode Rise Time 1 µs to CW -- Pulse Width / Rep Rate / Duty Cycle are Set by Utilizing TTL Input
- Compact, Highly Advanced Design w/RS485 / USB / Ethernet Interfaces and Control Software Included
- Arbitrary Waveform Look-Up Table Stored On-Board
$1,375.00 -
SKU: LDD-1137-CW / LASER-DIODE-DRIVER
High Power Precision LASER DIODE DRIVER; 75 Amp Current Range / 70V Compliance Voltage Range
- High Performance, Low Noise Laser Diode Current Source
- Compact, Highly Advanced Design with RS485 / USB / Ethernet Interfaces and Control Software Included
- Current Noise < 0.2% of Set-Point
$1,195.00In Stock -
SKU: LDD-1121-SV / LASER-DIODE-DRIVER
High Performance Laser Diode Driver / 15A Current Range / 15V Compliance Voltage Range
- Operates in Pulsed and CW Modes
- Output Current: 0 ~ 15 Amps
- Output Compliance Voltage: Range 0 ~ 15 Volts
$1,016.00In Stock -
SKU: TEC-1161-4A-NTC / TEC-CONTROLLER
Dual Output Precision TEC Controller, 2 x 84W Output Channels, 0.01 °C Temperature Control Stability
- Two Independent TEC Controller / Driver Channels
- 2 x 84 Watt TEC Controllers
- Output Current up to ±4 Amps per Channel
$619.00 -
SKU: TEC-1090-HV-NTC / TEC-CONTROLLER
High Power Precision TEC Controller, 480W Output, 0.01°C Temperature Control Stability, Ultra-Compact
- Controls Temperature to within 0.01°C of Set-Point
- Output Current Range ±16 A
- Output Voltage Range ±30 V
$604.00 -
SKU: LDD-1124-SV / LASER-DIODE-DRIVER
Advanced Performance Laser Diode Driver, 1.5 Amp CW and Pulsed
- Output Current: 0 to 1.5 Amps, <0.1% Ripple
- Compliance Voltage up to 15 Volts
- CW and Chopped-CW Pulse Modes
$1,016.00 -
SKU: LDD-1125-HV-30 / LASER-DIODE-DRIVER
High Power 30 Amp Pulsed / CW Laser Diode Driver
- Operates in Pulsed and CW Modes
- Output Current: 0 - 30 Amps
- Output Compliance Voltage: Range 0 - 27 Volts
$1,016.00 -
SKU: TEC-1161-10A-NTC / TEC-CONTROLLER
Dual Output Precision TEC Controller, 2 x 210W Output Channels, 0.01 °C Temperature Control Stability
- Two Independent TEC Controller / Driver Channels
- 2 x 210 Watt TEC Controller Outputs
- Output Current up to ± 10 Amps
$801.00In Stock -
SKU: TEC-1091-NTC / TEC-CONTROLLER
Precision TEC Controller, 84W Output, 0.01 °C Temperature Control Stability
- TEC Output Voltage: 0 to ±21 V; TEC Output Current: 0 to ±4 A
- Controls Temperature to Within 0.01°C of Set-Point
- Temperature Sensor Configured an NTC Sensor (ie 10K Thermistor) ** also available configured for Pt100, Pt1000 or voltage on request
$371.00 -
SKU: TEC-1122-SV-NTC / TEC-CONTROLLER
Dual Output Precision TEC Controller, 2 x 210W Output Channels, 0.01 °C Temperature Control Stability
- Two Independent TEC Controller / Driver Channels
- 2 x 210 Watt TEC Controllers
- Output Current up to ± 10 Amps per Channel
$980.00 -
SKU: EVL-1093 / TEC-CONTROLLER-BOARD
Integration Board for TEC-1092 TEC Controller
- Integration And Prototyping Board for TEC-1092
- Saves Valuable Time Early in the Design/Test Phase
- Includes USB Control Interface
$95.00 -
SKU: TEC-1092-NTC
Precision TEC Controller, 11.5W Output, 0.01 °C Temperature Control Stability, Ultra-Compact Form Factor
- Controls temperature to within 0.01°C of set-point
- TEC output current: 0 to ±1.2 A
- TEC output voltage: 0 to ±9.6 V
$344.00In Stock -
SKU: DPY-1113
TEC Controller Display Kit | Accessory for Meerstetter Engineering Precision TEC Controllers
- OLED Display Kit for Meerstetter TEC Controllers
- Simplifies OEM Integration
- Connects Directly to TEC Board
$182.00In Stock