OsTech
Showing 1–16 of 21 results
-
SKU: LDI-127/
High Power Laser Diode Driver | Current Range 15A, Voltage Range 56V | Multi-Stage Protection for High Power Laser Diodes
- Multiple Layers of Laser Diode Protection:
- User Adjustable Current & Voltage Limits
- User Adjustable Soft-Start Current Ramp
- Protection Against Power Black-Out / Brown-Out & AC Surges
- Laser Diode Over-Temperature Shut-Down / External Monitor & Shut-Down - CW and QCW Modes of Operation / USB and RS232 Interface, LabVIEW Drivers
$2,695.00 - Multiple Layers of Laser Diode Protection:
-
SKU: LDM-95W
95W High Power Laser Diode Heat Sink and Mount; Fan & Peltier Cooled
- Laser Diode Mounting Plate Footprint and Lead Wires Pre-Configured for your Laser Diode Package; Integrated TE / Peltier Cooler Under Mounting Plate and 10 kOhm Thermistor
- Top Mounting Plates and Configurations Available for nLight, Jenoptik, LUMICS, QPC Lasers, Lumentum, DILAS-COHERENT, BWT and Others
- Comes with High Current Leads which Match your Laser Diode Anode/Cathode Pin Diameter and Control Signals I/O Cable for Laser Package
$1,149.00 -
SKU: LDM-50W
50W High Power Laser Diode Heat Sink and Mount; Fan & Peltier Cooled
- Integrated TE / Peltier Cooler Under Mounting Plate and 10 kΩ Thermistor
- Mounting Plate can be Pre-Configured for your Laser Diode Package
- Mounting Plate Thermal Resistance R (th): < 0.06 K/W
$879.00 -
SKU: LDM-275W
275W High Power Laser Diode Heat Sink and Mount; Water Cooled Base Plate
- Pre-Configured Mounting Plate for your Laser Package Type Available
- Thermal Resistance R (th): 0.01 K/W
- Laser Diode Waste Heat Removal of 275 Watts at Ambient / Lab Temperature of 25°C
$965.00 -
SKU: LDM-BUTTERFLY-X
14-Pin Butterfly Packaged Laser Diode Mount; Pre-Wired for Your Specific Laser Diode Pin Configuration
- No Jumper Wires to Set; Simply Choose the Correct Model & it Ships Pre-Configured for Your Laser Diode
- Optional Graphite Thermal Mounting Pad for Maximum Temperature Stability
- Option for Additional Peltier Cooler to Control the Butterfly External Case Temperature
$645.00 -
SKU: LDM-250W
250W High Power Laser Diode Heat Sink and Mount; Fan Cooled
- Pre-Configured Mounting Plate for your Laser Package Type Available
- Thermal Resistance R (th): 0.059 K/W
- Laser Diode Waste Heat Removal of 250 Watts at Ambient / Lab Temperature of 20°C
$985.00 -
SKU: TEC-336W
High Power TEC Controller; 336W Output, 0.01°C Temperature Control Stability
- Works with all Thermistors: (ie 10 kΩ) and RTD Sensors (ie pt 100)
- Temperature Control Stability 0.05°C
- ± 48 Volt Range for Series Connected Peltier Elements and High Power Peltier Elements
$2,795.00In Stock -
SKU: TEC-305
High Power TEC Controller, 216W Output, 0.005 °C Temperature Control Stability
- Up to ± 12 Amps, ± 20 Volts Output to Peltier Cooler
- Control Stability (8 hours @ 25°C) : 0.005°C
- User Set Laser Diode Temperature Limits (High and Low)
$1,049.00 -
SKU: TEC-020
High Power TEC Controller, 180W Output, 0.005°C Temperature Control Stability
- Accurate, fast temperature stabilization of high power laser diodes and thermal loads
- Works with all thermistors (ie 10 kΩ), 4-wire RTD sensors (ie pt 100), K-type thermocouples
- Temperature control stability 0.005°C (1 hr. @ 25.00°C)
$2,295.00In Stock -
SKU: TEC-590
Dual Output TEC Controller, 2 x 128W Outputs, 0.05°C Temperature Control Stability
- High Stability Dual Independent Temperature Controller for Laser Diodes and Crystals
- Dual ±8 A, ±16 V, TEC / Peltier Controller Outputs
- Dual Temperature Sensor Inputs
$1,049.00 -
SKU: LDI-344
High Power Laser Diode Driver | Current Range 125 Amps | Designed for High Power Laser Diode Bars & Arrays
- Protection Features Optimized for High Power Laser Diode Bars and Arrays
- CW Mode and Integrated QCW Pulse Generator
- QCW Pulse Width Range 29 μs to CW
$4,689.00 -
SKU: LDI-581
High Power Laser Diode Driver | Current Range 120 Amps | Multi-Stage Protection Designed Specifically for High Power Laser Diodes
- Multiple Layers of Laser Diode Protection:
- User Adjustable Current & Voltage Limits
- User Adjustable Soft-Start Current Ramp
- Protection Against Power Black-Out / Brown-Out & AC Surges
- Laser Diode Over-Temperature Shut-Down / External Monitor & Shut-Down - CW and QCW Modes | Integrated QCW Pulse Generator and Remote Trigger Input
- User Configurable Soft-Start Current Ramp and Enhanced High Power Laser Diode Protection Features
$4,295.00 - Multiple Layers of Laser Diode Protection:
-
SKU: LDI-880
High Power Laser Diode Driver | Current Range 100 Amps | Compliance Voltage Range 30 Volts
- Current up to 100 Amps; Compliance Voltage up to 30 Volts
- Optimized for Safely Biasing Laser Diode Bars and Stacks in Series
- CW Mode Pulse Mode; User-Set Pulse Widths from 30 µs to CW
$6,295.00 -
SKU: LDI-607
High Power Laser Diode Driver | Current Range 70 Amps | Designed for High Power Laser Diode Bars & Arrays
- Protection Features Optimized for High Power Laser Diode Bars and Arrays
- CW Mode and QCW Modes (Includes Internal QCW Pulse Generator)
- RF Modulation Input and Output Functionality
$4,295.00 -
SKU: LDI-595
60 Amp High Power Laser Diode Driver, CW and QCW Modes
- 60 Amp (CW), 12 Volt High Power Laser Diode Driver
- CW and QCW Modes
- Integrated QCW Pulse Generator: Pulse Widths 25μs to CW
$2,095.00 -
SKU: LDI-824
High Power Laser Diode Driver / 25A Current Range / 64V Compliance Voltage Range
- Laser Diode Protection Features Optimized for High Voltage Pump Laser Diodes and Laser Diodes Connected in Series
- Operates in CW Mode or QCW Mode: Integrated Quasi-CW Pulse Generator with Pulse Width from 30 µs to CW
- RS232 Interface / USB Option Included / LabVIEW Drivers
$4,295.00In Stock